MODULO Exterior-Interior Adhesive is a paste-type adhesive for outdoor and indoor use. Specially formulated for cladding with materials such as natural stone, decorative stone, or exposed brick, it is the ideal choice for fast and long-lasting results.

The product comes already prepared and can be applied immediately after opening.

How to use: Before you start applying the product, make sure that the surface is pre-cleaned, hard enough, and as flat as possible. The product is spread on the surface of the materials, then uniformized with a notched trowel. Once applied, fix the plates in the desired position by firm pressing movements. Be sure to fix or adjust the plates within 20 minutes, otherwise, you risk the adhesive starting to harden.

Contraindications:

Do not apply the product on porous surfaces (aerated concrete, drywall, chipboard, etc.) without priming.

Do not mix the product with substances such as water, cement, lime, etc., otherwise, you may damage it.

Do not use the product to secure non-absorbent materials to non-absorbent substrates.

Do not use the product in areas with high humidity or permanent immersion in water (swimming pools, water tanks, etc.).

Coverage: 3-5 kg / m2
Application temperature: from + 5 °C to + 35 °C
Application time: 20 min
Adjustment time: 20 min
Joint grouting: after at least 12 hours
Final hardening: after 7-14 days, depending on the absorption of the surfaces
Term of availability: 18 months

Application surfaces: plaster or cement decorative stone, natural stone, glass mosaic tile, thermal and sound insulation board, wood panels (interior), concrete, brick, aerated concrete (BCA), plaster, gypsum boards, cement slabs, wood